C
5
To switch the appliance off, when using speed 1, 2, or 3,
press the “O” button.
Helpful Hints
1
The stopper may be used as a measuring cup by placing the
stopper upside down in the lid.
C
2
The opening in the lid can be used for adding ingredients while
the motor is running.
3
Do not let the appliance run for longer than 3 minutes at a
time. If you have not finished processing after 3 minutes, switch
the appliance off (O) for one minute before you let it run again.
C
4
Pre-cut meat and other solid ingredients into smaller pieces
before putting them into the blender jar.
5
For optimal blending of solid ingredients, feed a series of small
amounts into the jar rather than processing a large quantity at
once.
6
If the ingredients are still too large or chunky, switch the
Blender to off (O) position and then let it run briefly a couple
of times by pressing the
M
(momentary/pulse) button, or turn
the appliance off (O), wait until blades stop turning and stir the
ingredients with a rubber spatula or reduce the contents of
the blender jar and process smaller amounts at a time.
7
To crush ice cubes drop them onto the blades through the
opening in the lid while the motor is running. Remove the
crushed ice when the blender jar is 1/2 full.You may find that
using the
M
(momentary/pulse) button works best.
NOTE:
Hold lid in place with one hand while processing ice cubes.
8
If you are processing solid and liquid ingredients at the same
time, first put the liquid ingredients in the blender jar. Add the
solid ingredients while the Blender is running
.
6
