10
EN
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
Press
AUTO VOLUME
repeatedly to select
a setting within three seconds on the display
panel:
•
ON
: Turn on auto volume.
•
OFF
: Turn off auto volume.
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
available for Dolby encoded DVD and Blu-ray
discs.
Press
NIGHT MODE
repeatedly to select a
setting within three seconds on the display
panel:
•
ON
: Turn on night mode.
•
OFF
: Turn off night mode.
Note
•
If auto volume is set to
ON
, you cannot enable the
night mode.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press
AUDIO SYNC
.
2
Within two seconds, press the
Navigation
buttons
( / ) to change the delay
shown on the display panel.
3
Press
AUDIO SYNC
again to exit.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press
SURR. SOUND
repeatedly to select a
setting within three seconds on the display
panel:
•
AUTO
: Surround sound based on the
audio stream.
•
STEREO
: Two-channel stereo sound. Ideal
for listening to music.
•
360SOUND
: Surround sound for best
cinematic experience.
Note
•
If you play a source with DTS,
DTS
is displayed on the
display panel for two seconds.
•
If you play a source with Dolby,
DOLBY D
is displayed
on the display panel for two seconds.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of your SoundHub.
Press
/-
or
BASS +/-
within three
seconds to change the frequency shown on the
display panel.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the SoundHub
as described in the Quick start guide.
2
Press
MUSIC iLINK
.
»
I-LINK
is displayed on the display
panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.
