9
EN
Choose your sound
This section helps you choose the ideal sound
for your music.
Change treble or bass
Change the high frequency (treble) or low
frequency (bass) settings of the SoundBar to
suit your music.
Press
/-
or
BASS +/-
to increase or
decrease treble or bass.
• The
Source indicators
on the front panel
blink once when the treble or bass is set to
either minimum or maximum.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press
SURROUND
repeatedly to switch
surround mode on or off.
»
When surround mode is on, the
SURR
on
the front panel lights up.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1
Press and hold
SURROUND
for three
seconds to turn night mode on or off.
»
When night mode is turned on, the
AUX
indicator on the front panel
blinks twice.
»
When night mode is turned off, the
MUSIC iLINK
indicator on the front
panel blinks twice.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN
connector on your SoundBar.
2
Press
MUSIC iLINK
(
AUDIO IN
) on the
remote control.
»
AUDIO IN
indicator on the front
panel lights up.
3
Press the buttons on the MP3 player to
select and play audio files or music.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 3.0 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
