2
EN
1 Important safety
instructions
Warning
•
The voltage on the network is classified as TNV-3
(Telecommunication Network Voltages), as defined in
the standard EN 60950.
To avoid damage or malfunction
Caution
•
Use only the batteries listed in the user instructions.
•
Risk of explosion if battery is replaced by an incorrect
type.
•
Dispose of used batteries according to the instructions.
•
Do not dispose of batteries in fire.
•
Always use the cables provided with the product.
•
Do not allow the charging contacts or the battery to
come into contact with metal objects.
•
Do not let small metal objects come into contact with
the product. This can deteriorate audio quality and
damage the product.
•
Metallic objects may be retained if placed near or on
the handset receiver.
•
Do not use the product in places where there are
explosive hazards.
•
Do not open the handset, base station or charger as
you could be exposed to high voltages.
•
Do not allow the product to come into contact with
liquids.
•
Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
•
Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
•
Do not drop your phone or allow objects to fall on
your phone.
•
Active mobile phones in the vicinity may cause
interference.
About operating and storage temperatures
•
Operate in a place where temperature is
always between 0°C to +40°C (up to 90%
relative humidity).
•
Store in a place where temperature is
always between -20°C and +45°C (up to
95% relative humidity).
•
Battery life may be shorter in low
temperature conditions.
2 Your phone
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
What is in the box
Base station
Handset
Line cord*
Coil cord
Summary of Contents for CRD150
Page 2: ......
