8
Connect power
1
Make the power connection as illustrated below:
Connect the ground wire from the car to the
•
GND
socket.
Connect the remote wire from the car audio to the
•
REM
socket.
With this connection, you can turn on/off the amplifier with the car audio.
•
Connect the power wire from the car battery to the
•
+12V
socket.
Less than 450mm (18 in)
Fuse (40A)
+12V car battery
Car audio unit
Remote output
To a metal point of the car
Tip
If your car audio does not have remote output, connect the remote input terminal (REM) to the accessory
•
power supply.
To avoid short circuit, cover the power socket with the supplied shield and screws after connected power
•
wires. See below illustration:
EN
CMQ405_00_UM_V2.0.indb 8
12/22/2010 11:02:44 AM
