EN
8
Introduction: Digital TV
8
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 13.
Next to analogue broadcast reception, your TV has a built-in TV
tuner which receives, decodes and displays digital terrestrial
signals.
Digital TV and radio channels are only available and reproduced:
- when Digital Video Broadcasting Terrestrial (DVB-T) is
applicable in your local area;
- and if DVB-T signal is supported by your TV for the country
you live in. See www.philips.com/support for the list of
supported countries.
Switch the TV on
<
Press the power switch
B
at the side of the TV.
>
An indicator on the front of the TV lights up and the
screen comes on.
<
If the TV is in standby mode, press the
-P+
keys or the
B
key on the remote control.
Note: the first time (and only the first time) you switch
on your TV, you see a Welcome screen followed by the
installation procedure. See First time installation, p. 9.
First time installation
The first time (and only the first time) you switch on your TV,
you see a Welcome screen followed by the installation
procedure.
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
Summary of Contents for Cineos 32PF9631D
Page 63: ...63 Contents EN ...
