Philips Cinema 50PFL7956, Manual

Page: 37 / 86

4
4.1
Setup
Picture and sound
Picture
In the Picture menu, you can adjust all picture settings
.individually
To open the Picture settings, press
h
> Setup > TV settings >
. Picture
Contrast •
.Sets the contrast level of the picture
Brightness •
.Sets the brightness level of the picture
Colour •
.Sets the level of colour saturation
Hue •
.If NTSC is broadcast, hue compensates the colour variations
Sharpness •
.Sets the level of sharpness of fine detail
Noise reduction •
.Filters out and reduces the image noise in the picture
Tint •
Sets the colours to Normal , Warm (reddish) or Cool (bluish).
Select Custom to set up your own personal settings in the
.Custom menu
Custom tint •
.Use the slider bar to set the colour temperature of the picture
Pixel Precise HD •
.Controls the advanced settings of the Perfect Pixel HD Engine
Perfect Natural Motion removes motion judder and —
.reproduces smooth movement, especially in movies
Clear LCD
gives a superior motion sharpness, better black —
level, high contrast with a flicker-free, quiet image and a larger
.viewing angle
Super resolution enables superior sharpness, especially on —
.lines and contours in the picture
Perfect contrast sets the level at which the TV automatically —
enhances the details in the dark, middle and light areas of the
.picture
Dynamic backlight
sets the level at which power consumption —
can be reduced by dimming the brightness intensity of the screen.
Choose for the best power consumption or for the picture with
.the best brightness intensity
MPEG artefact reduction smooths the digital transitions in the —
.picture
Colour enhancement makes the colours more vivid and —
.improves the resolution of details in bright colours
Gamma
is a non-linear setting for picture luminance and —
contrast. Use the slider bar to set a higher or lower gamma
.value
PC mode •
Sets the TV to the ideal pre-defined computer setting if a
.computer has been connected
Light sensor •
Adjusts the picture and Ambilight settings automatically to the
.lighting conditions of the room
Picture format •
.Read Help > Basics > Watch TV > Picture format
Screen edges • 
.Slightly enlarge the picture to hide distorted edges
Picture shift •
.Move the picture up / down or left / right with the cursor keys
Sound
.In the Sound menu, you can adjust all sound settings individually
To open Sound settings, press
h
> Setup > TV settings >
.
Sound
Bass •
.Sets the level of low tones in the sound
Treble •
.Sets the level of high tones in the sound
Surround •
.Sets the surround sound effect from internal speakers
Headphones volume •
.Sets the volume for the headphone connection of the TV
Auto volume levelling •
Reduces sudden volume differences like at the beginning of
.adverts or when switching from one channel to another
Balance •
Sets the balance of the left and right speakers to best fit your
.listening position
Eco settings
.Eco settings bundle the TV settings that help the environment
While you are watching TV channels, press the
Green
key to
.open Eco settings . Active settings are marked with a
ê
.Press again to close
Energy saving
This Smart picture setting sets the picture, together with
Ambilight, in the most ideal energy conscious setting. To switch
.on, select Energy saving in Eco settings and press OK
.To switch off Energy saving, select another Smart picture setting
Screen off
If you only listen to music, you can switch off the TV screen to
save energy. Select Screen off and press OK . To switch the
.screen back on, press any key on the remote control
Light sensor
The built-in light sensor automatically adjusts the picture, together
with Ambilight, to the lighting conditions of the room. To switch
on, select Light sensor and press OK . To switch off, press OK
.again
Auto switch off
If no keys on the TV remote control were pressed during a 4-
hour period, the TV switches off automatically to save energy.
.You can switch off this
Auto switch off
If you use the TV as a monitor or use a digital receiver to watch
TV (a set top box - STB) and you do not use the remote
.control of the TV, switch off the automatic switch off
Smart settings
If you select a Smart setting in the ADJUST menu, you can again
change the settings of the selected Smart setting with the Picture
and sound settings in Setup. The Smart setting remembers your
.changes
Setup / Picture and sound 37