8
EN
Mount into the dashboard
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
• If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
3
Remove the mounting sleeve with the
supplied disassembly tools.
4
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
183 mm
53mm
5mm
Note
•
If the unit is not fixed by sleeve but by the supplied
screws, skip this step.
5
Place the supplied rubber cushion over the
end of the mounting bolt.
183 mm
53.5 mm
