24
EN
9 Other settings
Turn on or off the screen
backlight
To turn on or off the screen backlight of the
system, press and hold
.
Select Video Output format
The default video output format is based on
the format that is broadcast in your country.
If the picture is distorted, change the video
output.
Simply press the
button repeatedly to
select the correct video output format.
Listen to other devices
You can connect an external audio/video device
to the car audio system.
1
Connect the the device to the car audio
system.
2
Press
.
»
The main menu is displayed.T
3
Press the navigation buttons to select
[AV-IN]
.
4
Operate the connected the device (see
the device's instructions manual).
Set rear view camera
If you connected a rear view camera, you can
see from the screen of the car audio system
what the camera takes when the back lamp
lights up.
1
In reverse driving mode, press
.
»
The main menu is displayed.
2
Press the navigation buttons to select
[CAMERA]
.
»
Picture from rear camera is displayed.
Tip
•
If it is not in reverse gear, the camera will not work, for
there is no power supply.
•
To adjust camera setting, see "Adjust general
settings"section.
Reset
To reset the car audio system to its default
setting:
1
Detach the front panel.
2
Press
by using a ball-point pen or
similar tool.
»
All settings are erased except clock.
CED230_51_UM_V2.1.indb 24
8/14/2012 4:38:06 PM
