Philips ce133, User Manual

Page: 10 / 22

8
EN
Mount into the dashboard
• If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
1
Make sure that the car dashboard opening
is within these measurements:
2
Remove the mounting sleeve with the
supplied disassembly tools.
183 mm
53mm
5mm
3
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
4
Slide the unit into the sleeve until you hear
a "click".
183 mm
53.5 mm