Philips CDR-775 Instructions For Use Manual Download Page 33

Page: 33 / 35

If your CD recorder is defective, it is wise to check this list
first. You may have forgotten a simple step.

Warning!

Under no circumstances should you attempt to repair
the CD recorder yourself because this will invalidate
the guarantee.

SYMPTOM

• possible solution:

No power

• ensure that the ON/OFF button is on (red LED

on): the CD Recorder is in Standby mode,
press any key to activate it

• make sure that the power cable is plugged in

correctly

• switch the recorder OFF and then

immediately back ON

Auto track does not work

• check that auto track on is selected in the

• check if there are 2.7 seconds of silence

between the tracks (analog recording only)

• check if the source is a consumer source with

digital output according to the IEC audio
standard

• source is DVD player (no track information)

No sound

• check the audio connections
• if using an amplifier, try using a different

source

Amplifier sound is distorted

• make sure that the CD recorder analog output

is not connected to the amplifier Phono input

Play will not start

• make sure that the label of the CD is facing

• clean the disc
• make sure that the disc is not defective by

trying another disc

Remote control does not work

• point the remote control directly at the CD

recorder

• check the batteries and replace if necessary
• select the right source first

Will not record

• clean the disc
• make sure that the CDR(W) is an unfinalized

disc

• make sure that the disc is recordable and

replace if necessary

• the disc is not an AUDIO disc (

WRONG

DISC

)

• wrong input source chosen. Input label

flashing (

CHECK INPUT

)

• text memory full (

MEMORY FULL

FINALIZE CD

). When a CDRW has to be

unfinalized for recording. Erase text for other
disc(s) or finalize other disc(s) to obtain
memory space

• total remaining time is not sufficient; try

programming tracks (see programming)

Recording is distorted

• make sure the recording level is correct

20 second pause between recordings

• see Autostart recording from external CD

player (CD-SYNC)

Player does not react

• switch the ON/OFF button on the front of the

player off and back on

DISC RECOVER

on display

• a power failure has occurred during

recording; the CD recorder is attempting to
repair the disc

• if

DISC ERROR

then appears on the

display, the disc cannot be recorded further,
and cannot be finalized. But it can still be
played on the CD recorder or another CD
recorder

• on a CDRW disc, the track being recorded is

lost, but further recording and finalization can
still be done

TROUBLESHOOTING

FIXING PROBLEMS

English

Summary of Contents for CDR-775




































Search results

Summary of Contents for CDR-775

Reviews:

Related manuals for CDR-775

Brands by name

Popular brands

Philips CDR-775, Instructions For Use Manual

Search results

Summary of Contents for CDR-775

Reviews:

Related manuals for CDR-775

Brands by name

Popular brands