
21
English
Recording from internal deck
Set the recording level, if necessary, to make compilations
from different discs with equalized volume levels. Pre-
recorded CD’s often have different volume levels. When
playing back your compilation you could hear these
differences in volume between tracks.
Amplifying a of digital audio information stream will distort
the audio signal.This means that digital signals can only be
decreased in volume to obtain equal audio levels for
different tracks. Our advise is to record all tracks on -3dB
(or lower if needed). In this way it is possible to
- increase (0 dB is maximum) the volume level for
those tracks with a weaker signal,
- decrease (-3 dB or less) the volume level for those
tracks with a stronger signal.
For pre-listening you need to make a test recording with a
CDRW disc in the left disctray:
1
After pressing the TYPE button rotate the EASY JOG/
ENTER button to decrease the level (e.g. -3dB) for the
track(s) of the first disc.
2
Press RECORD to record a track.
3
Press STOP
9
.
4
Listen to the track(s) of the next disc to determine the
recording level.
5
Press the TYPE button, rotate the EASY JOG/ENTER
button to increase/decrease the recording level and repeat
step
2
and
3
.
6
Judge the various recording levels from your test recording.
Now you are able to make a final recording and preset the
correct recording level of each individual track before you
record it.
7
Place the CDR(W) disc on which you want to make your
final recording.
Notes:
During recording it is possible to adjust the recording level
with the EASY JOG/ENTER button.
The adjusted recording level is stored in the memory of your
recorder (also when powered off!).
During RECORD FAST mode no sound and therefor no
adjustments are audible.
Recording from external source
Some external analog sources have such high output levels,
that you may need to adjust the recording level to ensure
good quality recordings without distortion.
1
Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the left CDR tray.
2
Press EXT SOURCE repeatedly to select the ANALOG
input
➜
ANALOG
lights up and
ANALOG
will appear on the
display.
3
With the CD recorder stopped, press TYPE five times to
select REC EXT MAN.
➜
starts to flash and the display shows
PRESS RECORD
.
4
Start the source by pressing PLAY/PAUSE
2;
.
DO NOT start recording!
5
Rotate the EASY JOG/ENTER button to decrease the
record level until, on the Record/Play Level bar, all the blue
segments are alight, but the red segments do not light
continuously during the loudest passages.
6
Press STOP
9
on the CD recorder and on the source.
➜
The adjusted recording level is stored in the memory of
your recorder (also when powered off!).
Note:The recording level can also be adjusted for digital or
optical recordings after selecting the
DIGITAL 1
or
OPTICAL
input.
Adjusting recording level