English
EN
9
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate the
battery level (from full to low).
When the handset is on the base
station/charger, the bars flash until
charging is complete.
The empty battery icon flashes. The
battery is low and needs recharging.
If you are on the phone, you hear warning
tones when the batteries are almost empty.
The handset turns off when the batteries are
completely empty.
What is standby mode?
Your phone is in standby mode when it is idle.
When the handset is off the charging cradle,
the standby screen displays the date and time.
When the handset is on the charging cradle,
the standby screen displays the time as a screen
saver.
Change the remote access
PIN code
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Select
[Menu]
> >
[Remote access]
>
[Change PIN]
, then press
[OK]
to confirm.
2
Enter the old PIN, then press
[OK]
to
confirm.
3
Enter the new PIN code, then press
[OK]
to confirm.
4
Enter the new PIN code again, then press
[Save]
to confirm.
»
The setting is saved.
Charge the handset
Place the handset on the charging cradle to
charge the handset. When the handset is placed
correctly on the base station, you hear a docking
sound.
»
The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 21).
Your phone is now ready to use.
Summary of Contents for CD6950
Page 2: ......