Philips CCZ254AT99 Owner'S Manual Download | Manualshive

Page: 3 / 60

background image

om

Introduction 3

Features

• A-B Repeat Play
• Automatic Channel Setup
• Automatic Operation Features
• Automatic Tracking Adjustment
• Closed Caption
• Daylight-Saving Time
• High Quality (HQ) System
• Index Search
• On-Screen displays in English or Spanish
• On-Screen Menu Programming, accessible with remote control or front panel but-

tons

• One-Touch Recording
• Real-Time Counter
• Remote Control with capability to operate a Cable Box or Direct Broadcast System
• Remote Locator
• Repeat Play
• Skip Search
• Sleep Timer
• SmartClock

TM

• Smart Picture
• Special Effects Playback: Forward and Reverse Searching; Still; Variable Slow; Frame

Advance

• Timer Recording
• VCR Plus+ Programming System

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
FCC Warning: Any unauthorized changes or modifications to this equipment void the
user’s authority to operate it.
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This TV/VCR, equipped with a High Quality (HQ) system, is compatible with existing
Video Home System (VHS) equipment.

Philips Consumer Electronics Company recommends that you use only video cas-
sette tapes that have been tested and inspected for use in two, four, six, and eight hour
VCRs, and which are labeled with the

mark. The use of tapes that have not been

inspected for use in two, four, six, and eight hour VCRs may result in poor picture qual-
ity and excessive deposits on the video heads, which may not be covered by the war-
ranty if damage occurs.

Note to the Cable TV System Installer: This reminder is provided to call the
Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,
which provides guidelines for proper grounding – in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the
point of cable entry as possible.

SmartClock

TM

is a trademark of Philips Consumer Electronics Company.

Copyright 1998 Philips Consumer Electronics Company. All rights reserved.

Welcome to your TV/VCR owner’s manual.

This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;
Recording Options; Playing Options; and Information You May Need. The instructions explain all of the
TV/VCR’s features, which are listed below.

CCZ254comb.QX33 4/6/99 9:01 PM Page 3

«
1
2
3
4
5
...
»

Summary of Contents for CCZ254AT99





























































Reviews:

No comments

Related manuals for CCZ254AT99

Brand: Daewoo Pages: 60

Brand: Hitachi Pages: 25

Brand: Hitachi Pages: 33

Brand: Hitachi Pages: 50

Brand: Hitachi Pages: 40

Brand: Hitachi Pages: 60

Brand: Hitachi Pages: 44

OmniVision PV-QV201

Brand: Panasonic Pages: 28

OmniVision PV-QV200

Brand: Panasonic Pages: 36

Omnivision PV-S7680

Brand: Panasonic Pages: 44

Omnivision PV-S4680

Brand: Panasonic Pages: 40

Omnivision PV-S7670

Brand: Panasonic Pages: 44

OmniVision PV-Q920

Brand: Panasonic Pages: 40

Omnivision PV-S4690

Brand: Panasonic Pages: 48

Omnivision PV-9455S

Brand: Panasonic Pages: 40

Omnivision PV-9400

Brand: Panasonic Pages: 40

Omnivision PV-8450

Brand: Panasonic Pages: 36

Omnivision PV-8200

Brand: Panasonic Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands