Philips CAD310, Service Manual

Page: 8 / 28

1-8
LOCAL/DX mode : Rotate the control to choose tuner sensitivity local or distant.
STEREO/MONO mode : Rotate the control to choose FM stereo or mono.
DSP mode : Rotate the to choose DSP sound effect: control
P DSP OFF OP ROCK CLASS FLAT
LOUD mode : Rotate the control to choose loudness on or off.
BEEP ON/OFF mode : Rotate the control to choose button beep sound on or off.
PUSH SEL
VOL
DN
UP
SEEK 1/2 mode:
Rotate the control to choose radio seek mode 1 or 2 .
SEEK 1: searching station will stop when next station is received.
SEEK 2: searching station will stop when or button is released and next station is received.
VOL LAST / ADJUST MODE
Rotate control to choose this enables the unit's VOL LAST :
memory to retain the volume level last used before you
switch off the unit.
Rotate control to choose
VOL ADJ:
then rotate the control to set to the volume level you want as
your default volume level setting for whenever you switch on the unit.
TA mode : Rotate the to choose TA ALARM or TA SEEK mode. When the Traffic Announcement (TA) is turned on, if there is control no
traffic program identification code received in the specified time, no TA/TP will display and either TA ALARM or TA SEEK will
be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode : TA automatically SEEK is activated.
MASK mode :
Rotate the
to choose MASK
DPI or MASK ALL
mode.
control
In some cases, the AF function may be influenced by some interference, examples are signals with
strong field but without the RDS data.For this reason, the unit has two options to avoid the above
interference.
Only AF which has different program identification is masked.
MASK DPI mode :
MASK ALL mode :
The AF which has different program identification and NO RDS
signal with high field strength is masked.
PUSH SE L
VOL
DN
UP
Controls
RETUNE mode:
Rotate the control to
choose RETUNE-S
or RETUNE-L
or is time length selection of TA SEEK retune interval.
short, TA SEEK retune interval is 45 seconds.
long, TA SEEK retune interval is 180 seconds.
mode functions for TA during TA SEEK mode only.
RETUNE-S RETUNE-L
RETUNE-S:
RETUNE-L:
Remark: RETUNE
TA mode MASK mode RETUNE mode DSP mode LOUD ON / OFF BEEP ON / OFF
VOL mode LOCAL/ DX mode STEREO / MONO mode
SEEK1/2 mode
(only in tuner mode)
(only in tuner mode)
VOL
DN
UP
Press for more than 2 seconds to enter the menu mode, then each press changes the mode as follows: the control
(only in FM mode)
www.freeservicemanuals.info