9
EN
Set clock
1
In standby mode, press and hold
CLOCK
on the remote control for more than two
seconds.
»
[24H]
or
[12H]
hour format is
displayed.
2
Press / to select
[24H]
or
[12H]
hour format.
3
press
CLOCK
to confirm.
»
The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in power-on mode by
pressing
CLOCK
.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
Press again to switch the unit to standby
mode.
»
The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
Press and hold for more than two seconds.
»
The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Switch between standby mode and ECO
standby mode:
Press and hold for more than two seconds.
Summary of Contents for BTM2185
Page 2: ......
