9
EN
Prepare the remote control
Caution
•
Risk of product damage! When the remote control is
not to be used for long periods, remove the battery.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Set clock
1
In power-on mode, press and hold
CLOCK
on the remote control for 3
seconds.
»
The
[24H]
or
[12H]
hour format is
displayed.
2
Press / to select the
[24H]
or
[12H]
hour format.
3
press
CLOCK
to confirm.
»
The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set the hour and
minute.
Note
•
If no button is pressed within 90 seconds, the unit exits
clock setting mode automatically.
Tip
•
You can press
CLOCK
to view clock information in
power-on mode.
Turn on
• Press .
»
The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
»
The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
• Press and hold for more than 3 seconds.
»
The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
• Press and hold for more than 3 seconds.
