Philips BTB2315, User Manual, Page: 18 / 26

16
EN
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC , FM , DAB , or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for three seconds.
»
[TIMER] is displayed, and then [DISC]
is displayed and begins to blink.
2
Press / (or SOURCE ) repeatedly to
select an alarm source ( DISC , USB, DAB ,
FM ).
3
Press
SLEEP/TIMER
(or
OK
) to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour, minute, and
adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view the
alarm information and activate or deactivate the
alarm.
»
If timer is activated, [TIMER] is
displayed.
» If timer is deactivated,
[TIMER]
(timer)
disappears.
Tip
•
If DISC/USB source is selected, but no disc is placed or
no USB connected, the system switches to FM source
automatically.
Set the sleep timer
To set the sleep timer, in turn on mode, press
SLEEP/TIMER
repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated, [
SLEEP
]
is displayed. Otherwise, [
SLEEP
]
disappears.
Ajust the display brightness
Press DIM repeatedly to adjust the display
brightness:
•
[DIM 1]
•
[DIM 2]
•
[DIM OFF]
Listen to an external device
You can listen to an external device through this
unit with an audio cable.
1
Press SOURCE repeatedly to select
AUDIO IN source.
2
Connect an audio cable (not supplied)
between:
•
AUDIO IN
jack (3.5 mm) on the unit;
• and the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).