Philips BTB1370, User Manual

Page: 16 / 28

14
EN
4
Press PROG / SCAN to confirm.
» The name of the preset station is
displayed.
5
Repeat the above steps to store more
DAB+ stations.
6
Press
ALBUM/PRESET
/ to select a
manually stored station, and then press OK
to confirm.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Show DAB+ information
• While listening to DAB+ radio, press INFO
repeatedly to scroll through the following
information (if available):
• Station Name
• RDS TEXT message
• Dynamic Label Segment
• Program Type
• Ensemble Name
• Frequency
• Signal error rate
• Bit rate
• Audio status (DAB, DAB+)
• Time
• Date
Use DAB+ menu
1
In DAB+ mode, press / MENU to access
the DAB+ menu.
2
Press / to scroll through the menu
options:
• [FULL SCAN] (full scan): scan and
store all the available DAB+ radio
stations.
•
[MANUAL]
(manual): tune to a DAB+
station manually.
•
[PRUNE]
(prune): remove all the
invalid stations from the station list.
•
[SYSTEM]
(system): adjust system
settings.
3
To select an option, press OK .
4
If a sub-option is available, repeat steps
2- 3.
[SYSTEM] (system)
•
[RESET]
(reset): reset all settings to
factory default.
•
[UPGRADE]
(upgrade): upgrade
software if available.
•
[SW VER]
(software version): show the
software version of this unit.
Note
•
If no button is pressed within 30 seconds, the menu
exits.
Listen to FM radio
Tune to a radio station
1
Press
DAB/FM
repeatedly to select the
tuner source.
2
Press and hold / for 3 seconds.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press / repeatedly until you find the
optimal reception.
Store FM radio stations automatically
Note
•
You can program a maximum of 20 preset radio
stations (FM).
1
In tuner mode, press
/MENU
to access
the FM tuner menu.
»
[SCAN]
is displayed.