Philips BT6700, User Manual

Page: 11 / 14

8
EN
6 Specif ications
Note
•
Product information is subject to change
without prior notice.
Rated output
power
(Amplifier) 12W RMS
Acoustic
frequency
response 100-20000 Hz
Speaker driver 2 x 1.5” full range, 8
Ω
Bass
enhancement 2 x passive radiator
Bluetooth
version V4.0
Bluetooth
supported
profiles HFP V1.5, A2DP V1.2,
AVRCP V1.4
Bluetooth
frequency band
/ Output power 2.400GHz
~
2.483GHz ISM Band
/
≤
4dBm (Class 2)
AUX input level 650mV RMS
Water
resistance IPX4
Built-in battery Li-ion battery
(3.7 V, 4400 mAh)
Play time in
battery mode Approx. 8 hours
Dimensions
- Main unit
(W x H x D) 188 x 71 x 70 mm
Weight -
Main unit 0.5 kg
7 Trouble-
shooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using
this device, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips Web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are available.
General
No power
•
Recharge the speaker.
No sound
•
Adjust volume on this product.
•
Adjust volume on the connected
device.
•
In AUDIO IN mode, make sure that
music playback through Bluetooth
is stopped.
•
Make sure that your Bluetooth
device is within the effective
operational range.
The LED indicator is solid red, and
the speaker has no repsonse when
pressing any key.
•
The speaker is in demo mode. To
exit this mode: after connecting to
AC power, press and hold , turn on
the speaker, then release the key
after 20 seconds.