Philips Bruce FC6093, User Manual

Page: 9 / 156

4 FC6095 only: insert the telescopic stick and the floor nozzle into
the nozzle & stick holder (‘click’) (Fig. 6).
Charging the appliance
Caution: Make sure the appliance is switched off when you charge it.
Charge the appliance for at least 18 hours before you use it for the first
time.
Tip: If you are not going to use the appliance for a longer period of time,
remove the adapter from the wall socket to save energy.
1 Charge the appliance in one of the following two ways:
- Insert the small plug into the charger, insert the adapter into the wall
socket, and place the appliance on the charger (Fig. 7).
- Insert the small plug into the charging socket of the appliance
and insert the adapter into the wall socket (Fig. 8).
,
The charging light on the appliance goes on to indicate that the
appliance is charging (Fig. 9).
Note: The charging light stays on as long as the appliance is placed on the
charger and the adapter is in the wall socket.
Note: The charging light does not give any information about the charge level
of the built-in battery pack.
using the appliance
1 Push the on/off slide forwards to switch on the appliance (Fig. 10).
2 Push the on/off slide backwards to switch off the
appliance. (Fig. 11)
3 Leave the adapter in the wall socket and always put the vacuum
cleaner back onto the charger after use, even if the battery pack is
still almost fully charged.
English
9