Philips BRI858, Manual

Page: 36 / 238

Problem Possible cause Solution
The
device/adapter
becomes warm
during use.
This is normal. No action required.
When I place the
device on the
skin, it does not
release a flash.
The 'ready to
flash' light blinks
orange.
Your skin tone in
the area to be
treated is too dark.
Treat other body areas
with lighter skin tones with
Lumea.
The ready to flash
light blinks
orange and all 5
intensity lights
blink as well.
The device needs
to be reset.
To reset the device take
the plug out of the socket,
wait for 30 minutes to let
the device cool down. The
device should function
normally again. In case it
doesn't work again,
contact the Consumer Care
Center in your country.
The ready to flash
light does not
light up green.
The device is not
completely in
contact with your
skin.
Place the device at a 90
degree angle on the skin
so that the integrated
safety system in in contact
with your skin.
The light exit
window or the skin
tone sensor is dirty.
Clean the light exit window
and the skin tone
sensor carefully.
The device
produces a
strange smell.
You have not
removed the hairs
on the area to be
treated properly.
These hairs may
get burned and can
cause the smell.
Pretreat your skin before
you use Lumea.
36
English