background image

11

EN

  

•  Press any source key on a slave speaker to 

change it to be the master of the group.

 

»

Pair your mobile device with the new 

master if you have not paired with it 

before. 

Switch to single mode

  

Press 

GROUP

 on the master to enter 

single mode.

 

»

The slaves keep looking for the master 

until timeout in 15 minutes.

 

»

You can create a new group with the 

slaves or press 

GROUP

 on a slave to 

enter single mode.

•  Press 

GROUP

 on the master again to 

resume group mode.

Press 

GROUP

 on a slave to switch to 

single mode. 

 

»

The 

GROUP

 indicator on the speaker 

turns off, and the 

 indicator flashes 

blue.

•  Press 

GROUP

 again to rejoin a group.

 

»

The 

GROUP

 indicator lights up again 

and the   indicator turns off.

Control play

Note

 

Due to data buffering, you may experience some 

delay when you play/pause or adjust volume from the 

Bluetooth device.

Control from the speaker

•  In single mode, turn the speaker 

on/off.

•  In group mode, turn the whole 

group of speakers on/off.

•  In single mode, pause/resume play 

of the current speaker.

•  In group mode, pause/resume play 

of the whole group.

+/-

•  Turn clockwise/anticlockwise to 

increase/decrease volume of the 

current speaker.

Control from the connected Bluetooth device

You can use controls on your Bluetooth device 

directly. 

Summary of Contents for BM6























Reviews: