14
User Manual BDS4241R
4.
CONNECTIONS TO EXTERNAL EQUIPMENT
4.1
CONNECTING TO AN AERIAL
To view TV channels correctly, a signal must be received using an
antenna. Connect the aerial or network input cable to the ANT jack on
the rear of the PDP.
Note:
When installing or re-installing your PDP, be sure to use the supplied
coaxial antenna cable. If you connect using a different coaxial cable,
there is risk of noise or interference to the screen image.
(You must not use another general purpose cable.
Use the 3M/5M/7M cable supplied by your dealer.)
• An outdoor aerial
• A cable TV network
4.2
CONNECTING EXTERNAL EQUIPMENT (VCR,
DVD, CAMCORDER, SATELLITE RECEIVER)
4.2.1
USING SCART (AV) SOCKET INPUT
1 Connect the SCART socket of the external device to the SCART
socket of the PDP.
2 Connect the video recorder to the antenna wall socket or cable
box.
4.2.2
USING S-VIDEO INPUT
1 Connect the S-Video (4-pin DIN) connector of the external device
to the S-VIDEO INPUT of the PDP.
2 Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks located next to the S-VIDEO connector.
Summary of Contents for BDS4241R
Page 1: ......