20
EN
Advanced options (clear
memory...)
1
Press .
2
Select
[Setup]
>
[Advanced]
to access the
advanced setup options.
•
[BD-Live security]
: Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live
discs).
•
[Downmix mode]
: Control 2-channel
stereo audio output.
•
[Software update]
: Select to update
software from a network or from USB
storage device.
•
[Clear memory]
: Delete the previous
BD-Live download on the USB storage
device or SD card. A "BUDA" folder is
automatically created to store the BD-
Live download.
•
[Local storage]
: Select a USB storage
device or SD card to store the
downloaded BD-Live files.
•
[DivX
®
VOD Code]
: Display the
DivX
®
registration code or the
deregistration code for this player.
•
[Version information]
: Display the
software version of this player.
•
[Restore default settings]
: Reset this
player to the default settings made at
the factory, except for password and
parental control level.
Note
•
You cannot restrict Internet access on commercial
Blu-ray discs.
•
Before you purchase DivX videos and play them on this
player, register this player on www.divx.com with the
DivX VOD code.
4 Update software
Before you update the software of this player,
check the current software version:
•
Press , and then select
[Setup]
>
[Advanced]
>
[Version information]
, and
press
OK
.
Update software via the
Internet
1
Connect the player to the Internet (see
"Set up a network").
2
Press , and select
[Setup]
.
3
Select
[Advanced]
>
[Software update]
>
[Network]
.
»
If an upgrade media is detected, you
are prompted to start the update.
4
Follow the instructions on the TV screen
to update the software.
»
When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1
Check the latest software version on www.
philips.com/support.
•
Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a
Unzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
b
Put the "UPG_ALL" folder in the root
directory.
