EN
-
11
3.
3.1. Front Panel
* The unit can also be turned on by pressing these
buttons.
1. Disc tray
• Place a disc after opening the disc tray.
2. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
3.
(open/close) button*
• Press to open or close the disc tray.
4.
• Press to stop playback.
5.
(play) button*
• Press to start or resume playback.
• This button lights up during playback.
6.
(standby/on) button
• Press to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
• This button lights up when the power is on and turns
off when the unit is in standby mode.
7. SD card slot
• Insert an SD card and play back the contents in it.
•
Due to new ENERGY STAR
®
requirements, this unit
will automatically enter standby mode after 25 minutes
of inactivity.
3.2. Rear Panel
1. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
2. LAN terminal
• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
3. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with an audio cable.
• Use to connect an AV receiver / amplifier,
Dolby Digital / DTS decoder or to another device
with a digital audio coaxial input jack with a digital
audio coaxial cable.
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with a video cable.
•
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
•
This unit does not have an RF modulator.
2
1
4 5
7
6
3
2
1
4 5*
7
6
3*
6
3
4 5
2
1
Summary of Contents for BDP3306
Page 67: ......
