Philips BDP3290B, User Manual

Page: 17 / 30

7
EN
1
Make sure that 3D output is turned
on: press , and select
[Setup] >
[Video] > [Watch 3D video] > [Auto] .
2
Play a Blu-ray 3D video.
3
Put on the 3D glasses for 3D effects.
• To turn off 3D output, press ,
and select
[Setup] > [Video] >
[Watch 3D video] > [Off] .
Set up a network
Connect this player to the Internet to
access the following service:
•
BD-Live: access online bonus
features (applicable to Blu-ray discs
that are BD-Live enabled).
1
Connect this player to the
Internet through wired (Ethernet)
connection.
•
Connect a network cable (not
supplied) to the
LAN port on the
back panel of this player.
2
Perform the network installation.
1) Press .
2)
Select
[Setup]
, and press
OK
.
3) Select [Network] > [Network
installation]
, and press
OK
.
4) Follow the instructions on the TV
screen to complete the installation.
Caution
•
Before you connect to a network,
familiarize yourself with the network router
and networking principles. If necessary,
read documentation accompanying
network components. Philips is not
responsible for lost, damaged, or corrupt
data.
Use Philips EasyLink
This player supports Philips EasyLink
which uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use a single remote control to control
EasyLink compliant devices that are
connected through HDMI. Philips does
not guarantee 100% interoperability
with all HDMI CEC devices.
1
Connect the HDMI CEC compliant
devices through HDMI, and turn on
the HDMI CEC operations on the TV
and other connected devices (see
the user manual of the TV or other
devices for details).
2
Press .
3
Select [Setup] > [EasyLink] .
4
Select
[On]
under the options:
[EasyLink] , [One Touch Play] and
[One Touch Standby]
.
» EasyLink function is turned on.
One Touch Play
When a video disc is in the disc
compartment, press to wake up the
TV from standby, and then play a disc.
One Touch Standby
When a connected device (for
example TV) is put to standby with its
own remote control, this player is put
to standby automatically.
BDP3290B_98_UM_V1.0.indb 7 2016/9/2 14:06:16