Philips BDP1301, User Manual

Page: 3 / 28

2
•
If the product is transported in temperatures below 5°C, unpack the product and
wait until its temperature matches room temperature before connecting it to the
power outlet.
Risk of overheating!
•
Never install this product in a confined space. Always leave a space of at least four
inches around the product for ventilation. Make sure that curtains or other objects
never cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
•
Danger of explosion if batteries are incorrectly replaced. Replace only with the
same or equivalent type.
•
Remove batteries if they are exhausted or if the remote control is not to be used
for a long time.
•
Batteries contain chemical substances, they should be disposed of properly.
Risk of swallowing batteries!
•
The product/remote control may contain a coin/button type battery, which can be
swallowed. Keep the battery out of reach of children at all times! If swallowed, the
battery can cause serious injury or death. Severe internal burns can occur within
two hours of ingestion.
•
If you suspect that a battery has been swallowed or placed inside any part of the
body, seek immediate medical attention.
•
When you change the batteries, always keep all new and used batteries out of
reach of children. Ensure that the battery compartment is completely secure after
you replace the battery.
•
If the battery compartment cannot be completely secured, discontinue use of the
product. Keep out of reach of children and contact the manufacturer.
This is CLASS II apparatus with double insulation, and no protective earth provided.
CLASS 1
LASER PRODUCT
BDP1301_96_UM_V2.0.indb 2 2015/11/12 10:21:07