Philips BDP1300, User Manual

Page: 3 / 30

1 EN
Safety and important notice
Read and understand all instructions before you use this Blu-ray disc/ DVD player. If
damage is caused by failure to follow the instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
•
Before you make or change any connections, make sure that all devices are
disconnected from the power outlet.
•
Never expose the product and accessories to rain or water. Never place
liquid containers, such as vases, near the product. If liquids are spilt on or into
the product, disconnect it from the power outlet immediately. Contact Philips
Consumer Care to have the product checked before use.
•
Never place the product and accessories near naked flames or other heat sources,
including direct sunlight.
•
Never insert objects into the ventilation slots or other openings on the product.
•
Where the mains plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
•
Batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
•
Disconnect the product from the power outlet before lightning storms.
•
When you disconnect the power cord, always pull the plug, never the cable.
Risk of short circuit or fire!
•
For identification and supply ratings, see the type plate at the back or bottom of
the product.
•
Before you connect the product to the power outlet, ensure that the power
voltage matches the value printed on the back or bottom of the product. Never
connect the product to the power outlet if the voltage is different.
Risk of injury or damage to the product!
•
Visible and invisible laser radiation when open. Avoid exposure to beam.
•
Do not touch the disc optical lens inside the disc compartment.
•
Never place the product or any objects on power cords or on other electrical
equipment.
•
If the product is transported in temperatures below 5°C, unpack the product and
wait until its temperature matches room temperature before connecting it to the
power outlet.