User Manual BDL4771V
RETURN TO THE CONTENTS
HDMI with One Wire
One Wire uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share
functionality between connected devices and the display. To transfer system commands, you need to use an
HDMI cable to connect the display to a device equipped with HDMI CEC. Select On in this menu and you
can operate the main functionalities on your display and the connected device with one remote control. For
instructions on how to use the One Wire function, please refer to the One Wire DFU on the accompanying
CD ROM.
Notes:
• The One Wire-compliant device must be switched on and selected as the source.
• We do not guarantee 100% interoperability with all HDMI CEC devices.
Smart power
Set the display to reduce the power consumption automatically. Setting to
High
will bring the most power
savings.
Use the
UP
/
DOWN
button to toggle between
Auto signal detection
Select to let the unit detect and display available signal source automatically.
•
On
- Set the unit to display the image automatically once a signal is connected.
•
Off
- Once a signal is connected, it can only be selected manually.
Use the
UP
/
DOWN
button to make selection.
Settings cloning
Select Monitor to USB or USB to Monitor to transfer all the OSD settings between the display and a USB
flash drive.
Advanced option reset
Reset all settings in the
Advanced option
menu.
Press the
PLUS
button to open the submenu, and then press
PLUS
/
MINUS
to make selection. Select
Reset
and press the
SET
button to restore settings to factory preset values. Press the
EXIT
button to
cancel and return to the previous menu.
•
Off
•
Medium
•
High
