Philips BDL46xxE, Service Manual

Page: 9 / 50

Philips BDL46xxE 8
4. Preset factory mode
All timings must be properly phased, sized and centered.
Full-Screen = The input timing is scaled to full screen, regardless of scaling artefacts
Aspect Ratio = Resolution to which the native is scaled and centered
COMPATIBILITY TABLE
Mode Aspect Ratio Handling
Standard Resolution Full-Screen Aspect Ratio Composite SVHS YPBPR RGB HDMI
VESA 640x480 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA 640x480 @ 72Hz 1920x 1080 16:9 N N N Y Y
VESA 640x480 @ 75Hz 1920x 1080 16:9 N N N Y Y
720x400 @ 70Hz 1920x 1080 16:9 N N N Y Y
VESA 800x600 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA 1024x768 @ 60Hz 1920x 1080 16:9 N N N Y Y
1280 x 720 @ 60Hz 1920x 1080 16:9 N N N Y Y
PD40 1280 x 768 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA(M9) 1280 x 768 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA 1280x1024 @ 60Hz 1920x 1080 16:9 N N N Y Y
M9 1360 x 768 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA 1360 x 768 @ 60Hz 1920x 1080 16:9 N N N Y Y
VESA 1600x1200 @ 60Hz 1920x 1080 16:9 N N N Y Y
M9 1920x1080 @ 50Hz 1920x 1080 16:9 N N N Y Y
SMPTE 1920x1080 @ 60Hz 1920x 1080 16:9 N N N Y Y
1920x1080 @ 60Hz 1920x 1080 16:9 N N N Y Y
PAL 576I(50Hz) 1920x 1080 16:9
NTSC 480I(60Hz) 1920x 1080 16:9
DVD 480p(60Hz) 1920x 1080 16:9
480i(60Hz) 1920x 1080 16:9
720p(50Hz) 1920x 1080 16:9
720p(60Hz) 1920x 1080 16:9
1080i (50Hz) 1920x 1080 16:9
1080i (60Hz) 1920x 1080 16:9
OVERCAN
Component over scan: 5~8%
AV over scan: 5~9%
HDMI/DVI-D over scan: No over scan for PC input, 5~9% for video source.
PC: No over scan
ASIC FOS Performance (excluding Scaling Artifacts) will be judged according to:
Definition of “COMPATIBLE MODE”:
ASIC correctly recognizes the proper resolution and applies the correct display scaling to the image.
(I.e. a 1280 x 720 signal is properly recognized)
Definition of “PROPERLY SIZED / CENTERED”:
The Entire Image (use Display Mate “Side Tics” pattern) perfectly fits the screen. Even one pixel off
in Horizontal or Vertical Direction, makes this area “FAIL”.
Definition of “PROPERLY PHASED”:
ASIC automatically computes the correct A/D response so that a Win98 “SHUTDOWN” or “ALL”
Display Mate “MOIRE” Patterns are correctly displayed. Most critical on the panels “NATIVE”; No
‘unstableness’ of the image shall be observed.
Definition of “HD Compatibility”:
All HD timings have to work through YPbPr, HDMI, and RGB.