User Manual BDL4631V/00
24
Power Indicator
Status
Power ON
Green
Power OFF
Red
Power Standby when
“SCHEDULE” is enable
Red On
Green Blinking
Power Standby
Red, Green
Diagnosis
(Detecting failure)
Red Blinking
* See troubleshooting
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or
the mouse has not been used for a certain period.
The power management feature on the LCD monitor has been set to the “ON” mode. This allows the system to enter a Power Saving Mode when no
signal is applied. This could potentially increase the life and decrease the power consumption of the LCD monitor.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI 1, 2, PC-A
FULL
NORMAL
CUSTOM
REAL
CVI , VIDEO
FULL
NORMAL
DYNAMIC
REAL
CUSTOM
Signal Type
NORMAL SIZE
Recommended Size
4:3
NORMAL
DYNAMIC
Squeeze
FULL
NORMAL:
Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at CVI or VIDEO signal.
FULL:
Display in the entire screen.
DYNAMIC:
Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)
CUSTOM (ZOOM):
Images can be expanded beyond the active display area. The image which is outside of the active display area would not be
shown.
REAL:
Image will be displayed for one by one pixel.
ZOOM
ZOOM
