Philips BDL4221V User Manual Download Page 107

Page: 107 / 119

United States Guarantee

Having the following information available will also help speed up the process:

●

Your proof of purchase indicating: date of purchase, dealer name, model and

product serial

number.

●

The full address to which the swap model should be delivered.

Just a phone call away

Philips’ customer help desks are located worldwide. Within the U.S. you can contact Philips
customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from
10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers.

For more information on this and more great Philips products visit our website at:

Website:

http://www.philips.com

file:///D|/My%20Documents/dfu/BDL_27/english/warranty/war_usa.htm (4 of 4)2006-03-10 1:34:37 PM

Summary of Contents for BDL4221V
























































































































Search results

Summary of Contents for BDL4221V

Reviews:

Related manuals for BDL4221V

Brands by name

Popular brands

Philips BDL4221V, User Manual

Search results

Summary of Contents for BDL4221V

Reviews:

Related manuals for BDL4221V

Brands by name

Popular brands