Philips BDL3221V/00, Service Manual

Page: 33 / 110

33
Go to cover page
BDL3221 LCD/TV
DDC Instructions
3. Click (Write EDID) icon from the tool bar to write DDC data. Then
wait for 20-30 seconds ,DDC data will be finished Writing.
Fig. 41
Fig. 39
8. Click Next , bring up Fig. 39.
- Click Finish to exit the Step window.
- Serial number can be filled up at this moment (for example,
123457).
NOTE: You must modify the Serial NO. In step 9, otherwise the
Serial NO. In OSD Couldn't be modified correctly.
Step 5: Write DDC data
1. Configuration should be as Fig. 40. And press OK.
Fig. 40
2. Click Save.
Step 7: Exit DDC program
Pull down the File menu and select Exit as shown in Fig. 43.
Step 8: Turn off the monitor, exit the factory mode.
Fig. 43
4) Push Menu to exit OSD menu. " "
Fig.42
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
1. Click (Save) icon (or click "file"-> "save as") from the tool bar and
give a file name as shown in Fig. 42.
The file type is EDID46 file (*.ddc) which can be open in WordPad. By
using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table ar completely
correct, it can be saved as *.ddc flie to re-load it into DDC IC for DDC
Data application.
Factory Mode indicator
2. Access Factory Mode
1). Turn off monitor.
2).
3). Press "MENU" button, wait until the OSD menu with
Characters "BDS 32*420WN6 EU V0.50.3 05051LC32*A
6K3*A1" (below OSD menu) come on the Screen of the
monitor.
Press power " " button.Then quickly push " " and " ",and
hold this two buttons , then the screen comes out "Waiting For
Automatic Adjustment ",then the screen will be black for one
second untill comes out "Windows screen"] => then release this
two buttons.