5
EN
3 Get started
Charge your headphones
Note
•
Before you use your headphones for the
first time, charge the battery for 5 hours for
optimum battery capacity and lifetime.
•
Use only the original USB charging cable to
avoid any damage.
•
Finish your call before charging the
headphones, as connecting the headphones
for charging will power the headphones off.
•
You can operate the headphones normally
during charging.
Connect the supplied USB charging
cable to:
•
the micro USB charging slot on
the headphones and;
•
the charger/USB port of a
computer.
»
LED turns white during
charging and turns off when the
headphones is fully charged.
Tip
•
Normally, a full charge takes 3 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with
your mobile phone for the first time,
pair it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If
you try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
1
Make sure that the headphones are
fully charged.
2
Press and hold for 2 seconds to
turn the headphones on.
3
Press and hold until the blue and
white LED flashes alternately.
»
The headphones remain in
pairing mode for 5 minutes.
4
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
5
Pair the headphones with the
mobile phone. For detailed
information, refer to the user
manual of your mobile phone.
The following example shows you
how to pair the headphones with your
mobile phone.
1
Activate the Bluetooth feature
of your mobile phone, select
BASS+ Over-Ear
.
2
Enter the headset password "
0000
"
(4 zeros) if prompted. For those
mobile phones featuring Bluetooth
3.0 or higher, no need to enter a
password.
BASS+ Over-Ear
SHB4405
