30
EN
Note
•
To enter a pause, press and hold .
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with
*
and
#
.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short]
,
[Medium]
and
[Long]
. The number of
available options varies with different countries.
For details, consult your service provider.
1
Press
MENU/OK
.
2
Select
[Services]
>
[Recall time]
, then
press
MENU/OK
to confirm.
3
Select an option, then press
MENU/OK
to
confirm.
»
The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press
MENU/OK
.
2
Select
[Services]
>
[Dial mode]
, then
press
MENU/OK
to confirm.
3
Select a dial mode, then press
MENU/OK
to confirm.
»
The setting is saved.
Note
•
If your phone is in pulse dial mode, press
during a
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
Auto clock
Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press
MENU/OK
.
2
Select
[Services]
>
[Auto clock]
, then
press
MENU/OK
to confirm.
3
Select
[On]
/
[Off]
. Press
MENU/OK
.
»
The setting is saved.
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
1
Press
MENU/OK
on the handset.
2
Select
[Services]
>
[Register]
, then press
MENU/OK
to confirm.
3
Press and hold
on the base station for
5 seconds.