7
English
EN
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
Note
•
The type plate is located on the rear of the main unit.
1
Connect the AC power cord to
AC
MAINS
jack on the back of the main unit.
2
Connect the power plug to the power
supply socket.
Tip
•
To use the built-in battery as power supply, unplug the
power cord from the power supply socket.
Charge built-in battery
With the built-in Li-ion battery, this portable
speaker systemcanwork without AC power.
To charge the built-in Li-ion battery,
•
Connect the main unit to AC power.
»
The main unit is charged
automatically.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch modes
Automatically switch the modes:
•
After the unit keeps inactive for 15
minutes, it automatically switches to
standby mode.
Manually switch the modes:
•
Press
STANDBY
to switch the unit
between working mode and standby
mode.
AZP6_12_UM_Book 1.indb 7
6/29/2012 11:00:35 AM
