14
EN
Use DAB menus
1
In DAB mode, press
MENU
to access the
DAB menus.
2
Press / to toggle through the menus.
•
[FULL SCAN]
:Scan for the DAB
stations.
•
[MANUAL]
: Tune to a station manually.
•
[DRC]
:Enable or disable DRC.
•
[PRUNE]
: Remove invalid stations
•
[SYSTEM]
: Access system setting menu.
3
Press
OK
to enter the menu.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
•
Press
OK
to activate the automatic search.
»
This product automatically stores radio
stations with sufficient signal strength.
Tune to a station manually
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
1
Press
OK
to access the station list.
2
Press / to select a station.
3
Press
OK
to confirm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press
OK
access the sub-menus.
2
Press / to select an option.
•
[DRC OFF]
: No compensation applied.
•
[DRC LOW]
: Medium compensation
applied.
•
[DRC HIGH]
: Maximum
compensation applied.
3
Press
OK
to confirm the selection.
Remove invalid stations
This option lists active stations and removes any
stations that are in the list but have no service
in your area.
1
Press
OK
to access the
[PRUNE]
menu.
2
Press / to select an option.
•
[N]
: Return to the previous menu.
•
[Y]
: Remove invalid stations from the
station list.
3
Press
OK
to confirm the selection.
System menus
1
Press
OK
to access system menu.
2
Press / to to select a sub-menus.
•
For details, refer to the section '
Use
system menus
'.