19
English
AZ 5140/98
page
19
CASSETTE RECORDER
1.
Set the source selector to
FM
or
MW
.
2.
Tune to the desired radio station using the
TUNING
knob.
3.
Press
9 /
to open the cassette holder.
4.
Insert a blank tape.
5.
Press
0
to start recording.
6.
For brief interruptions, press
;
. To resume recording,
press
;
again.
7.
To stop recording, press
9 /
.
1.
Set the source selector to
CD•VCD
.
2.
Insert a CD and if desired, programme track numbers.
3.
Press
9 /
to open the cassette holder.
4.
Insert a blank cassette.
5.
Press
0
to start recording.
™
Playing of the CD programme starts automatically from the
beginning of the programme.
6.
For brief interruptions, press
;
. To resume recording,
press
;
again.
7.
To stop recording press
9 /
To select and record a particular passage within a track
1.
Press and hold
∞
or
§
on the set to select a passage.
2.
Put the CD player in
;
position at the selected passage.
™
Recording will start from this exact point when you press
0
.
3.
Press
2;
to start recording.
To ensure a good recording and playback of the tape deck, clean
parts
A
,
B
and
C
show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
• Open the cassette holder by pressing
9 /
.
• Press
1
and clean the rubber pressure rollers
C
.
• Press
;
and clean the magnetic heads
A
and also the capstans
B
.
• After cleaning, press
9 /
.
Cleaning of the heads can also be done by playing a cleaning cassette through once.
A
A
B
C
SYNCHRO START CD RECORDING
RECORDING FROM THE RADIO
TAPE DECK MAINTENANCE
P001-021_AZ5140_98-Eng 3/11/05 9:50 Page 19
