Philips AZ420, User Manual, Page: 14 / 20

12
EN
7 Listen to the
radio
Tune to a radio station
Note
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
1
Press
SOURCE
repeatedly to select FM
mode.
» displayed on the panel.
2
Press and hold / for more than
2 seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press /
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 10 FM radio stations.
In tuner mode, press and hold
PROG
for 2
seconds to activate automatic program mode.
» [AUTO] (auto) is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 10 FM radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
»
[PROG] (program) blinks on the
display.
3
Press / or number buttons to
allocate a number to this radio station,
then press PROG to confirm.
• Station 1-5: Press
3 4 5
to
select corresponding stations.
• Track 6-10: 1. Press
5+
. (" 5 " flashes on
the display panel)
2. Press a second number button within 5
seconds to select the total station number.
(For example, if you press
5+
and then
3
,
station 8 will be selected.)
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / or number
buttons to select a preset radio station.