background image

AVIS

AVISO

POWER SUPPLY

BASIC FUNCTIONS

POWER SUPPLY

Whenever convenient, use the mains supply to 
conserve battery life. Make sure you remove the
power plug from the set and wall socket before insert-
ing batteries.

Batteries

(not included)

• Insert 6 batteries, type 

R-20

,

UM-1

or

D-cells

,

(preferably alkaline) with the correct polarity. 

(See

A

)

Remote control 
Important!
•  Before using the remote control, remove the

insulation plastic tab as shown in fig. 

A

.

•  If the remote control does not function  cor-

rectly or the operating range is reduced,
replace the battery with a new (CR2025) type
battery

1

Pull the battery tray out.

2

Replace a new battery

3

Fully insert the battery tray back to the original
position.

Incorrect use of batteries can cause electrolyte leak-
age and will corrode the compartment or cause the
batteries to burst.

Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.

• When inserting new batteries, do not try to mix old

batteries with the new ones.

Batteries contain chemical substances, so
they should be disposed of properly.

Using AC Mains

1

Check if the mains supply, as shown on 

the type

plate located on the bottom of the set

, corre-

sponds to your local mains supply. If it does not,
consult your dealer or service centre.

2

Connect the mains lead to the wall socket.

3

To disconnect the mains supply, unplug the set from
the wall socket.

4

Install the unit near the AC outlet and where the
AC power plug can be easily reached.

All markings are located on the bottom of
the set.

Auto-Standby mode

When a CD has reached the end of playback and
remains in the stop position for more than 15 minutes,
the set will switch off automatically to save mains.
When in pause position for 5 minutes, the CD playback
will stop automatically. 15 minutes later, the set
switches off. 

BASIC FUNCTIONS

Switching on and off and selecting function

1

Press

STANDBY 

(on the set only) to switch on.

2

Press

Source selector 

once or more to select:

CD,

TUNER

,

AUX

or

TAPE

function.

3

Press

y

to switch off the set.

Helpful hints:

– To change from 

TAPE

to

CD, TUNER

or

AUX

function, or when you are switching off the set:
first, make sure you press the tape 

STOP

9

key to

end playback and all the cassette keys are
released.

– The tone, sound settings, tuner presets and the 

volume level (up to a maximum volume level of 20)
will be retained in the set’s memory.

ADJUSTING VOLUME AND SOUND

Adjust the volume with the 

VOLUME

control.

=

Display shows the volume level 

and a

number from 0-32. (See 

2

)

Bass adjustment

There are three 

DBB

(Dynamic Bass Boost) options:

Off:

no bass enhancement

DBB1:

moderate bass enhancement

DBB2:

strong bass enhancement

• Press

DBB

once or more to select your option. 

DBB1,2 appears if DBB is activated.

How to MUTE the sound

1.

Press

MUTE

on the remote control to interrupt

sound reproduction instantly. 

=

Playback continues without sound and in the 
display flashes 

.

2.

To reactivate sound reproduction you can:

– press

MUTE

again;

– adjust the volume controls;
– change to another source.

Summary of Contents for AZ3068


















Reviews: