3
EN
1 Important
•
Read these instructions.
•
Follow all instructions.
•
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
•
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the unit.
• Only use attachments/accessories specified
by the manufacturer.
•
Unplug this unit during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when the
unit has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the unit has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
•
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
Install all batteries correctly, + and - as
marked on the unit.
•
Do not mix batteries (old and new or
carbon and alkaline, etc.).
•
Remove batteries when the unit is not
used for a long time.
•
Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
•
The unit shall not be exposed to dripping
or splashing.
•
Do not place any sources of danger on
the unit (e.g. liquid filled objects, lighted
candles).
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•
Never remove the casing of this apparatus.
•
Never place this apparatus on other electrical
equipment.
•
Never look into the laser beam inside this apparatus.
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
