background image

No sound/ power

Volume not adjusted

• Adjust the VOLUME

Power cord not securely connected

• Connect the AC power cord properly

Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

Disc contains non-audio files

• Insert a suitable disc or press 

∞ 

or

§ 

once or

more skip to an audio track, instead of the data
files.

Display does not function properly/No
reaction to operation of any of the 
controls

Electrostatic discharge

• Switch off and unplug the set. Reconnect after a

few seconds.

no

indication

No disc inserted 

• Insert a suitable disc 

Disc badly scratched or dirty

• Replace/clean CD (See Maintenance) 

CD-R(W) is blank or the disc is not finalized.

• Use a finalized CD-R(W)

Laser lens steam up

• Wait until lens has cleared.

Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact 
Disc standard

.

The disc skips tracks

Disc damaged or dirty

• Replace or clean disc

Shuffle or program is active

• Switch off shuffle/program

Sound skips during MP3 playback

MP3 file made at compression level exceeding
320kbps

Use a lower compression level to record CD
tracks into MP3 format

Disc damaged or dirty

Replace or clean disc.

Note:

DRM-protected WMA disc is not supported.

Dock operation

The menu navigation or photo playback of the
docked player cannot be carried out through the
buttons on AZ1330D or its remote control.

The buttons on AZ1330D and its remote control
can control playback of audio contents only.To
navigate the menu, use the controls on the
docked player.

Some buttons on AZ1330D and its remote con-
trol have no function.

The buttons ( 

2;

,

¡1

,

2™ 

and

VOLUME

) func-

tion only.

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING:

Do not open the set as there is a risk of electric shock. Under no cir-
cumstances should you try to repair the set yourself, as this will inval-
idate the guarantee.

AVIS

AVISO

Summary of Contents for AZ1330D
















Reviews: