English
CONTROLS/POWER SUPPLY
Using AC Mains
1
Check if the mains supply, as shown on
the type
plate located on the bottom of the set
, corre-
sponds to your local mains supply. If it does not,
consult your dealer or service centre.
2
If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local mains.
3
Connect the mains lead to the wall socket.
4
To disconnect the mains supply, unplug the set
from the wall socket.
The type plate is located on the bottom of the
set.
IMPORTANT!
For users in the U.K.: please follow the instruc-
tions on the upper righthand-side.
Helpful hints:
–
To avoid unnecessary energy consumption,
always adjust the
source selector
to
TAPE/OFF
after using the set. Also check that
the tape deck keys are released.
BASIC FUNCTIONS
Switching on and off and selecting function
1
To switch on, adjust the
source selector
to
CD/MP3
,
MW, FM
or
TAPE/OFF
as desired.
2
To switch off, adjust the
source selector
to
TAPE/OFF
and check the cassette keys are
released.
Helpful hints:
– To change from
TAPE
to
FM
,
MW
or
CD/MP3
function, or when you are switching off the set:
first, make sure you press the tape
0
9
key to end
playback and all the cassette keys are released.
– The tone, sound settings, tuner presets and the
volume level (up to a maximum volume level of 20)
will be retained in the set’s memory.
Adjusting volume and sound
1.
Adjust the volume with the
VOL
3
,
4
controls.
(or
VOLUME
+
,
–
on the remote control)
™
Display shows
and the volume level in
number from
00-32.
2.
Press
DBB
once or more to select dynamic bass
boost on or off.
™
Display: shows
when activated.
DIGITAL TUNER
Tuning to radio stations
1
Push the
source selector
to
MW
or
FM
.
–
is displayed briefly and then the radio sta-
tion frequency, waveband and, if programmed, a
preset number are shown. (See
2
)
2
Press and hold
∞
or
§
until the frequency in the
display starts running.
™
The radio automatically tunes to a station of suf-
ficient reception. Display shows
dur-
ing automatic tuning.
3
Repeat step 2 if necessary until you find the
desired station.
• To tune to a weak station, press
∞
or
§
briefly
and repeatedly until you have found optimal recep-
tion.
To improve radio reception:
• For
FM
, extend, incline and turn the telescopic aer-
ial. Reduce its length if the signal is too strong.
• For
MW
, the set uses a built-in aerial. Direct this
aerial by turning the whole set.
Programming radio stations
You can store up to a total of 20 radio stations in the
memory (10 FM and 10 MW), manually or automati-
cally (Autostore).
Manual programming
1
Tune to your desired station (see
Tuning to radio
stations
).
2
Press
PROG
to activate programming.
™
Display:
PROG
flashes.
3
Press
-
,
+
(on the remote control
3
,
4
) once or
more to allocate a number from 1 to 10.
4
Press
PROG
to confirm.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
You can erase a preset station by
storing another frequency in its place.
Autostore
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
1
Select
MW
or
FM
.
2
Press
PROG
until flashes.
™
Available stations are programmed (MW or FM).
After all stations are stored, the first autostore
preset station will then automatically play.
To listen to a preset or autostore station
Press the
ALBUM
/
PRESET -
,
+
(on the remote con-
trol
3
,
4
) buttons once or more until the desired pre-
set station is displayed.
SUPPLIED ACCESSORIES
– AC mains lead
– remote control
TOP AND FRONT PANELS
(See
1
)
1
PUSH TO OPEN
- press to open/close CD door
2
PROG -
CD/MP3:
programs tracks and reviews the
program
MW/FM:
programs preset radio stations
3
MODE
- selects different play modes: e.g.
REP
or
SHUF
(random order)
4
VOL
3
,
4
- adjusts volume level
ALBUM/PRESET
+
,
-
(up, down)
-
MP3 only:
selects albums
MW/FM:
selects a preset radio station
5
Display
- shows the status of the set
6
2;
- starts or pauses CD playback.
9
- stops CD playback;
- erases a CD program
∞
,
§
TUNING DOWN, TUNING UP -
CD/MP3:
- searches backward and forward within a
track;
- skips to the beginning of a current track/
previous/ later track
MW/FM:
- tunes to radio stations
7
DBB
(
D
YNAMIC
B
ASS
B
OOST)
-
turns the bass
enhancement on / off
8
CASSETTE RECORDER keys:
RECORD
0
- starts recording
PLAY
1
- starts playback
SEARCH
5
/
6
- fast winds/ rewinds tape.
STOP
•
OPEN
0
9
- stops the tape;
- open the cassette
compartment
PAUSE
;
- pauses playback or recording
9
Source selector: CD/MP3, MW
,
FM, TAPE/OFF
– selects CD/MP3-CD, radio or tape source of
sound;
– switches off the set
BACK PANEL
0
Telescopic aerial
- improves FM reception
!
Battery compartment
- for 6 batteries, type
R-14
,
UM2
or
C-cells
@
AC MAINS
- inlet for mains lead.
REMOTE CONTROL
1
VOLUME
+
,
–
– adjusts volume level
(up, down)
2
SHUFFLE
– plays all CD tracks in random order
3
2;
– starts/ pauses CD playback
4
SEARCH
5
,
6
– searches backwards/ forwards
within a track
5
ALBUM/PRESET
3
,
4
MP3 only:
selects albums
MW/FM:
selects a preset radio station
(up, down)
6
TUNING
∞
,
§
– tunes to tuner stations
7
9
– stops CD playback;
– erases a CD programme
8
¡
,
™
– skips to the beginning of a current track
previous/ subsequent track
9
REPEAT
–selects repeat modes
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
MAINS SUPPLY
Whenever convenient, use the mains supply to con-
serve battery life. Make sure you remove the power
plug from the set and wall socket before inserting
batteries.
Batteries
(not included)
Main set
(See
1
)
• Insert 6 batteries, type
R-14
,
UM2
or
C-cells
,
(preferably alkaline) with the correct polarity.
Remote control
(See
A
)
• Insert 2 batteries, type
AAA
,
R03
or
UM4
(prefer-
ably alkaline).
Incorrect use of batteries can cause electrolyte leak-
age and will corrode the compartment or cause the
batteries to burst.
•
Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
•
Batteries contain chemical substances, so
they should be disposed of properly.
POWER SUPPLY/BASIC FUNCTIONS
DIGITAL TUNER
