No sound /power
–
Volume not adjusted
• Adjust the VOLUME
–
Power cord not securely connected
• Connect the AC power cord properly
–
Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
–
Headphones connected to the set
• Disconnect headphones
–
Disc contains non-audio files
• Insert a suitable disc or press
SEARCH
∞
or
§
once or more skip to an audio track, instead
of the data files
Display does not function properly/No
reaction to operation of any of the con-
trols
–
Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
no
indication
–
No disc inserted
• Insert a suitable disc
–
Disc badly scratched or dirty
• Replace/clean CD (See Maintenance)
–
CD-R(W) is blank or the disc is not finalized.
• Use a finalized CD-R(W)
–
Laser lens steam up
• Wait until lens has cleared
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact Disc
standard
.
.
The disc skips tracks
–
Disc damaged or dirty
• Replace or clean disc
–
Shuffle or program is active
• Switch off shuffle/program
Note:
For a disc with CD Audio tracks and MP3
files, only the CD Audio tracks will be played.
Sound skips during MP3 playback
–
MP3 file made at compression level exceeding
320kbps
•
Use a lower compression level to record CD
tracks into MP3 format
–
Disc damaged or dirty
•
Replace or clean disc
Poor cassette sound quality
–
Dust and dirt on the heads, etc.
• Clean deck parts, see Maintenance
–
Use of incompatible cassette types (METAL or
CHROME)
• Only use NORMAL (IEC I) for recording
Recording does not work
–
Cassette tab(s) may be broken
• Apply adhesive tape over the missing tab space
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no cir-
cumstances should you try to repair the set yourself, as this will inval-
idate the guarantee.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separat-
ed into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
