Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
In the
STOP
position, press
PROG
to start
programming.
➜
Display shows
01
indicating the start of
the program.
PROG
and
01
flashes. (See
4
)
2
Press
∞
or
§
to select your desired track
number.
3
Press
PROG
to store the desired track.
➜
Display shows
02
(up to
20
in
sequence), indicating the next program
location available.
4
Repeat steps
2
to
3
to select and store all
desired tracks.
5
Press
2;
to play the program.
To review your program
In the stop position, press
PROG
➜
The display shows all the stored tracks in
sequence.
Helpful hints:
–
If you try to store more than 20 tracks, no
track can be selected and the display will
show all your stored tracks in sequence.
– If you press
PROG
and there is no track
selected,
01
is displayed.
To erase a program
You can erase a program by:
– pressing
9
(twice during playback or once
in the stop position);
– selecting
RADIO
or
TAPE
sound source;
– opening the CD door;
➜
Display:
PROG
disappears.
Selecting different playing
modes
During playback, you can select the playing
modes by pressing
REPEAT
and
SHUF-
FLE
once or more.
(
REPEAT
flashes) – plays the cur-
rent track continuously. (See
5
)
REPEAT
– plays the entire CD/program
continuously.
SHUFFLE
– plays all tracks in random
order.
REPEAT SHUFFLE
– repeats the entire
CD/program in random order. (See
6
)
•
To return to normal playback, press
REPEAT
or
SHUFFLE
until the REPEAT
or SHUFFLE modes are no longer shown.
REPEAT
CD Player
Tape operation/recording
Playing a tape
1
Adjust the
source selector
to
TAPE/OFF
.
2
Press
9/
to open the cassette holder, insert
a cassette and close the deck.
3
Press
1
to start playback.
To pause playback,
•
Press
8
.
To resume playback,
•
Press
8
again.
To stop playback,
•
Press
9/
.
Helpful hints:
–
The keys are automatically release at the end
of the tape, and the set is switched off except
if
8
has been activated.
Fast forwarding/rewinding
1
Press
5
or
6
until you reach your desired
passage.
2
Press
9/
to stop rewinding/fast forwarding.
General information on recording
•
Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
•
For recording, use only NORMAL type cas-
settes (IEC type I) on which the tabs have not
yet been broken.This deck is not suited for
recording on CHROME (IEC II) or METAL
(IEC IV) type cassettes.
•
The best recording level is set automatically.
Altering the
VOLUME
and
DBB
controls
will not affect the recording.
•
To protect a tape from accidental erasure,
break out the tabs. If you wish to record
again, cover the tabs with a piece of adhesive
tape.
CD synchro start recording
1
Select
CD
source.
2
Insert a CD and if desired, program track
numbers.
3
Press
9/
to open the cassette holder. Insert
a blank tape and close the deck.
4
Press
0
to start recording.
•
Playing of the CD programme starts automat-
ically from the beginning of the programme.
You don’t need to start the CD player sepa-
rately.
To pause recording,
•
Press
8
.
To resume recording,
•
Press
8
again.
To stop recording,
•
Press
9/
.
Cassette Recorder
