CD PLAYER
– Total track number: in stop position.
– Current track number: during CD play.
– Current track number flashes: in PAUSE mode.
–
SHUFFLE/REPEAT
mode: the respective mode is activated.
–
PROGRAM:
program function is active. P also appears briefly
when you store a track.
– No display: error in CD operation or with the CD
(see Troubleshooting).
1.
Set the source selector to CD.
2.
To open the CD compartment, press OPEN on the CD door.
3.
Insert the audio CD, printed side facing up.
4.
To close the CD compartment, push the door down.
– The CD player scans the contents of the CD and the total
number of tracks is displayed
5.
Press PLAY•PAUSE
2;
to start playback.
6.
Adjust the sound using the VOLUME control and the DBB switch.
7.
To interrupt playback, press PLAY•PAUSE
2;
.
Press PLAY•PAUSE
2;
again to continue playback.
8.
Press STOP
9
to stop CD playback.
9.
Set the source selector to TAPE/OFF position to switch off the
set.
Note:
CD playback will also stop when:
– the CD has reached the end;
– the CD door is opened;
– the source selector is in the RADIO or TAPE/OFF position.
Selecting a different track during playback
– You can jump to the next track by pressing SEARCH
§
once. If
you want to skip more than one track, press SEARCH
§
more
than once until the display shows the desired track number.
– If you want to repeat the running track from the beginning,
press
∞
SEARCH once. If you want to repeat one of the previous
tracks, press
∞
SEARCH more than once until the display
shows the required track number.
Starting with a particular track
1.
In the STOP position you can select a desired track using the
∞
SEARCH or SEARCH
§
button.
2.
Press PLAY•PAUSE
2;
to start playback.
SEARCH
∞
or
§
PLAYING A CD
CD DISPLAY INDICATION
7
AZ 1110/14 page 7
English
SHUFFLE
REPEAT
ALL
PROGRAM
SHUFFLE
STOP
PLAY•P
AUSE
SEARC
H
OPEN
SEARC
H
OPEN
SHUFFLE
SEARCH
MODE
SEARCH
PLAY
RECORD
STOP • OPEN
SEARCH
PLAY
RECORD
STOP • OPEN
