Philips AZ1038, User Manual

Page: 8 / 21

8
English
General information
Congratulations on your
purchase and welcome to
Philips!
To fully benefit from the
support that Philips
offers, register your prod-
uct at www.philips.com/
welcome.
Supplied Accessories
– AC power cord
Environmental informa-
tion
We have done our best to
reduce the packaging and
make it easy to separate into 3
materials:cardboard, expand-
able polystyrene, polyethylene.
Your set consists of materials
which can be recycled if disas-
sembled by a specialized com-
pany. Please observe the local
regulations regarding the dis-
posal of packaging, exhausted
batteries and old equipment.
Safety information
• Place the set on a flat, hard
and stable surface so that the
system does not tilt.
• Where the MAINS plug is
used as the disconnect
device, the disconnet device
shall remain readily operable.
• Do not expose the set, bat-
teries, CDs to humidity, rain,
sand or excessive heat
caused by heating equipment
or direct sunlight.
• The apparatus shall not be
exposed to dripping or
splashing.
• Adequate ventilation with a
minimum gap of 15cm (6
inches) between the ventila-
tion holes and surrounding
surfaces is necessary to pre-
vent heat build-up.
• Do not cover the ventilation
openings with items such as
newspapers, table-cloths, cur-
tains, etc.
• No objects filled with liquids,
such as vases, shall be placed
on the apparatus.
• No naked flame sources,
such as lighted candles,
should be placed on the
apparatus.
• The mechanical parts of the
set contain self-lubricating
bearings and must not be
oiled or lubricated.
• To clean the set, use a dry
cloth. Do not use any clean-
ing agents containing alcohol,
ammonia, benzene or abra-
sives as these may harm the
housing.
• Battery shall not be exposed
to excessive heat such as sun-
shine, fire or the like.
P001-020_AZ1038_Eng 5/15/08 16:02 Page 8