Philips AZ1027/12, User Manual, Page: 10 / 16

corresponds to the voltage printed on the back or the underside of the
Soundmachine.
Risk of electric shock! When you unplug the AC adaptor, always pull the •
plug from the socket. Never pull the cord.
Note
• Install the unit near the power supply socket and where the AC power
plug can be easily reached. (see
3
)
1
Connect the power cord to the
AC MAINS~
socket on the
Soundmachine and to the power supply socket.
To switch the Soundmachine off completely, disconnect the power •
cord from the power supply socket.
Tip
To save energy: After use, set the source selector to
•
TAPE/OFF .
4 Use your Soundmachine
Play a CD
Note
You cannot play CDs encoded with copyright protection technologies.
•
You can play commercially available audio:
CDs •
CD-Recordables (CD-R)
•
CD-Rewritables (CD-RW) •
1
Switch the source selector to
CD
.
2
Lift the lid of the CD compartment.
3
Insert a CD with the printed side facing up.
4
Close the CD lid gently.
The total number of tracks is displayed.
»
5
Press to start play.