English
DIGITAL TUNER
11
TUNING TO RADIO STATIONS
1.
Press
POWER
to on position.
2.
Press
TUNER
source button.
– The TUNER indicator lights up.
3.
Press
BAND
once or more to select the desired
FM/ AM
waveband.
4.
To tune to a radio station press
SEARCH
¡
or
™
for more than
1 second and release when the frequency in the display starts to
change.
– The radio automatically tunes to a station with sufficient
reception. Display shows
Srch
during automatic tuning.
5.
Repeat step 4 until you find the desired station.
– To tune to a weak station, press
SEARCH
¡
or
™
briefly and
repeatedly until the correct frequency is shown.
To improve radio reception
– For
FM
, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For
AM
, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
6.
Adjust the sound using
VOLUME
and
DBB
.
7.
Press
POWER
to off position to switch off the set.
– The TUNER indicator goes out.
Programming radio stations
You can store up to a total of 29 radio stations in the memory.
1.
Tune to your desired station (see
Tuning to radio stations
).
2.
Press
PROG
to activate programming.
– Display:
PROGRAM
flashes.
3.
Press
PRESET
4
or
3
once or more to allocate a number from
1 to 29 to this station.
4.
Press
PROG
again to confirm the setting.
– Display:
PROGRAM
disappears, the preset number and the
frequency of the preset station are shown.
5.
Repeat the above four steps to store other stations.
– You can overwrite a preset station by storing another
frequency in its place
Tuning to preset stations
Press
PRESET
4
or
3
once or more until the desired preset
number appears in the display.
AZ 2765 /17
page
11
TUNER
SHUFFLE
REPEAT
CD
STOP
SEARCH
PLAY/PAUSE
BAND
TAPE
PROG
B
DIGITAL
TUNER
AZ2765 CD RADIO CASSETTE RECORD
E
TUNER
SHUFFLE
POWER
CD
DBB
PROGRAM
TUNER
FM
